#osha-compliance

Clique numa etiqueta para ver os seus artigos, vídeos e notícias

Artigos（14）

Conformidade operacional · Conformidade OSHAAmérica do Norte

Warehouse Lockout Tagout for Conveyor Maintenance: Don't Skip Power Isolation, Locking, and Verification

Warehouse lockout tagout for conveyor maintenance comes down to three steps that actually save money and lives: isolate every energy source, lock it so only the person inside can restore it, and verify with a meter before anyone reaches in.

2026-11-01

Conformidade operacional · Conformidade OSHAAmérica do Norte

Warehouse Rack Beam Safety Locks and Upright Damage: Repair, Replace, or Take Out of Service?

A warehouse rack beam safety lock is invisible until it fails. When a forklift bends an upright, isolate first, grade the damage, then decide: repair, replace, or take the bay out of service.

2026-10-25

Conformidade operacional · Conformidade OSHAAmérica do Norte

Pallet Rack Seismic Retrofit in Existing Warehouses: The Anchor-Bolt, Bracing, and Row-Spacer Cost Math

Pallet rack seismic retrofit is a cost problem before it is an engineering problem. A cost analyst walks through the retrofit of existing warehouse racks in earthquake country — anchor bolts, bracing, and row spacers: what each piece of hardware prevents, what IBC, ASCE 7, and ANSI/RMI MH16.1 actually require of storage racks, and the three-way ledger of retrofit cost versus one collapsed bay versus the 10%-25% earthquake insurance deductible. The counter-intuitive findings: the bolts are the cheapest part — the engineer's stamp and the labor cost more — OSHA fines are the cheapest line on the whole table, and because moderate quake losses fall entirely inside the deductible, a seismic retrofit is the only way to transfer that slice of risk.

2026-10-18

Conformidade operacional · Gestão de produtos perigososAmérica do Norte

Why Paint Thinner Belongs in a Hazmat Storage Cabinet: 5 OSHA Requirements for Warehouse Storage Cabinets

Why does paint thinner belong in a hazmat storage cabinet? A warehouse operations manager breaks down the 5 OSHA hazmat storage cabinet requirements for warehouses — construction, capacity, labeling, and daily practice.

2026-10-15

Dentro do armazém · ops:layoutAmérica do Norte

Warehouse Break Rooms and Locker Rooms: Layout, Location, and the OSHA Compliance Math

A 15-year trucking veteran on warehouse break rooms and locker rooms: wrong location means extra miles, shift-change queues, and OSHA trouble. Three road stories plus a pre-build planning checklist.

2026-10-14

Conformidade operacional · Conformidade OSHAAmérica do Norte

Writing a Heat Illness Prevention Plan for Your Warehouse: OSHA Requirements in 2026

The federal heat rule isn't final, but your warehouse heat illness prevention plan can't wait. A warehouse operations manager's field guide: 80/90/95°F action tiers, a 7-14 day acclimatization schedule, and an 8-item written plan checklist built for 2026 enforcement reality.

2026-10-14

Conformidade operacional · Gestão de produtos perigososAmérica do Norte

Is One Spill Drill a Year Really Enough? A Driver's Take on Hazmat Drills, Debriefs, and What OSHA Expects

Is one hazmat spill drill a year really enough? A 15-year trucking veteran shares two firsthand stories — a midnight leak at a Houston warehouse and why the warehouse with the biggest drill panicked most — plus a usable drill-script checklist and a four-question debrief.

2026-10-12

Conformidade operacional · Conformidade OSHAAmérica do Norte

Pallet Racking Inspection Frequency: OSHA Has No Annual Rule — So How Often Should You Inspect?

OSHA has never set an annual inspection rule for pallet racking. This guide breaks down pallet racking inspection frequency under the general duty clause, with real citation data, a three-tier inspection schedule, and the records an inspector will ask to see.

2026-10-10

Dentro do armazém · Cadeia do frioAmérica do Norte

Freezer Warehouse OSHA Cold Stress Rules: Who's Liable When a Worker Gets Frostbite? Rest Breaks, Gear, and Training, Explained

Search "freezer warehouse OSHA cold stress rules" and you get thin supplier Q&As. Warehouse operations manager Chen Feng breaks down real OSHA cold stress compliance for freezer warehouses: how the General Duty Clause is enforced, a temperature-tiered rest rotation schedule, who pays for freezer PPE, and frostbite emergency response.

2026-10-10

Conformidade operacional · Conformidade OSHAAmérica do Norte

Warehouse Eyewash Stations: OSHA's 10-Second Rule and ANSI Z358.1 in Practice

If your warehouse handles corrosive materials, osha eyewash station requirements warehouse apply to you. This guide breaks down 29 CFR 1910.151(c) and ANSI Z358.1 for the warehouse floor: the 10-second rule, 15-minute flush, tepid water, weekly testing, and how $3,000–$4,000 of compliance beats a multi-thousand-dollar citation. Two real cases and a cost table included.

2026-10-10

Conformidade operacional · Direito trabalhistaAmérica do Norte

82°F and You're in Violation: An Indoor Heat Illness Prevention Playbook for California Warehouses

California's indoor heat illness prevention standard for warehouses (Title 8, Section 3396) has been in force since July 2024: once indoor temperatures hit 82°F with workers present, employers owe a written plan, water, cool-down areas, and training records. This piece breaks down the thresholds, an implementation checklist, enforcement data, and where regulation goes next.

2026-10-09

Conformidade operacional · Segurança contra incêndioAmérica do Norte

Hot Work in the Warehouse: Permits and Fire Watch for Welding and Cutting

Da Liu on warehouse hot work: the 35-foot fire-watch triggers in OSHA 1910.252, the half-hour watch rule, and why the written permit is your alibi when something burns.

2026-10-08

Conformidade operacional · Gestão de produtos perigosos

SDS Files: Do You Really Need One for Every SKU?

Two years ago I walked a 3PL warehouse in Fresno for a compliance check. The warehouse manager proudly pulled a thick binder out of a drawer and told me, "We have an SDS for every SKU." I flipped through it: toy instruction manuals, a carton supplier's product brochure, even a stack of sample shipping labels. The SDSs for the actual paint thinner, lithium batteries, and cleaning solvents on the floor? Not a single one. Here's the bottom line up front: no, you don't need an SDS for every SKU — but miss one you actually need, and an OSHA citation will hurt. When it comes to compliance, I'd rather you skip the carton brochure than miss the SDS for a bottle of industrial cleaner.

2026-10-04

Arsenal de automação · Transporte e separação

Conveyor Noise Complaints: How to Fix Them Without Rebuilding the Line

Noisy conveyor drawing employee complaints or OSHA attention? Here is how I locate the source, what the standards actually require, and the fixes ranked from cheapest to most expensive.

2026-10-03